For a better experience please change your browser to CHROME, FIREFOX, OPERA or Internet Explorer.

  • Oil and Hydrocarbon in Water

Deskripsi

Harga : Call
Tipe : Dijual
Date : 11/07/2018
Kondisi : Baru
Garansi : Ya
Lokasi : Jl. Mekar Agung, Ruko Taman Mekar Agung No 42, Mekarwangi, Bojongloa Kidul, Kota Bandung, Jawa Barat 40237, Indonesia

The MS1200 is an on-line monitoring system which provides low level measurements of hydrocarbons, oil and VOC (Volatile Organic Compounds) concentrations in water.

It is designed to:

Monitor water abstraction points such as raw river water, boreholes and reservoir water

Monitor wastewater for VOC contamination

Monitor drain systems for flammable liquids

Surface water systems for fuel pollution

Offer a monitoring solution for air, land remediation and industrial applications

Detect VOC breakthrough in carbon beds

The MS1200 works at very low concentrations of VOCs, Hydrocarbons and Oil in Water, with a measuring range that spans from 5 to 3000 ppb. This level of sensitivity means that it’s ideal to monitor the water at abstraction points (i.e. rivers, boreholes) and give an alarm if a contamination event happens. This in turn allows the operators to react in time to pollution events and avoid expensive replacements and shutdowns.

Principle of Operation

The MS1200 utilises a contactless measurement technique based on Henry’s Law, sensing headspace gases or volatiles in the sampling tank provided, and provides a measurement system with very low maintenance requirements. Thanks to the clever design and technology the sensor never touches the water. This allows reduced drift, virtually no fouling and very low maintenance.

The MS1200 is accurate to low ppb concentrations and its wide dynamic range allows it to be used in a wide variety of environments.

Control and Monitoring Options

The instrument is housed in a robust steel enclosure and can be powered from either 90 – 240V AC or 24V DC supplies.

Various communications options are available including 4 – 20mA, Profibus and Modbus.

This monitor is also available as a standalone unit without sampling system.

An ATEX compliant version of this system is available on request. For more information download the MS1200-SYS Oil in Water VOC Monitor Datasheet.

Specifications

Range*: 0 – 3000ppb in water

Accuracy**: +/-10%

Repeatability: +/-2%

Sampling Frequency: 5 – 20 Minutes

Data Storage: µSD Card and Internal Memory

Data Interface: 4 – 20mA, Profibus, Modbus, Wireless, USB

Alarms: x2 Via Relay Drivers, Levels User Definable

Operating Temperature Range: 0o – 40oC

Water Temperature Range: 1o – 40oC

Power Consumption: 10W Continuous (90-240VAC or 24VDC)

Reagents: None

Carrier Gas: None

Consumables: GAC filter media, Air Filter every 6 months

Calibration: Every 6 Months

Key Benefits

Continuous water sampling mode.

High sensitivity: ideal for potable water

Reports as µg/l TVOC as Toluene surrogate

Can be calibrated for specific substances

User definable alarm levels

Catches VOC chemical spills not just hydrocarbons

Alarms to SCADA and other communications interfaces



Lokasi

Buat rating


Iklan Sejenis

Top